Software & Internet

IPv6 Explained: The Internet's Bigger Address System

IPv6 is the newer version of the addressing system every internet connection relies on. It exists because the older IPv4 ran short of addresses, and its rollout is real but uneven.

A bunch of blue wires connected to each other

IPv6 is the newer version of the Internet Protocol, the system of numeric addresses that lets devices find and talk to each other online. It matters because the older version, IPv4, uses 32-bit addresses that were expected to run out, and IPv6 provides a vastly larger supply.

For most people the change is invisible. Phones, laptops and many home routers already speak both versions, and websites load either way. The differences show up for network operators, for governments planning infrastructure, and for anyone trying to understand why the internet still runs two address systems side by side.

What is IPv6, in plain terms?

Every device that sends data across the internet needs an address so that replies know where to go. An Internet Protocol (IP) address plays that role, and our explainer on how the internet works covers how addresses, names and routing fit together. Data travels in small chunks called packets, and each packet carries a source and a destination address.

IPv4 is the original version and uses 32-bit addresses, according to the National Institute of Standards and Technology (NIST). IPv6 was developed by the Internet Engineering Task Force (IETF), the main standards body for internet protocols, because the IPv4 supply was expected to be depleted. NIST describes the planned improvements in IPv6 as a streamlined header, extensibility for future protocols, security, mobility, quality of service and autoconfiguration.

The scale of the difference is hard to picture. Cloudflare, a network company, puts the IPv6 total at 340 undecillion possible addresses. By comparison, it notes that a single reserved slice of IPv4 space known as Class E contains 268,435,456 addresses, a tiny fraction of that figure.

IPv6 addresses also look different. Instead of four numbers separated by dots, they are written as groups of hexadecimal digits (numbers using 0 to 9 and the letters a to f) separated by colons, with runs of zeros that can be abbreviated.

Why did the internet need a new address system?

IPv4 was designed when the network was small. As connected devices multiplied, the pool of unassigned addresses shrank. NIST notes that the IETF began developing IPv6 because IPv4 address supply was expected to run out, and that two stopgaps were deployed to slow the depletion: classless addressing (CIDR), which allocates blocks more efficiently, and network address translation (NAT).

NAT is a function, usually performed by a router or firewall, that replaces the addresses in a packet with different ones, according to NIST’s glossary. It lets a private network with unregistered addresses reach the internet. In practice, a household’s phones, TVs and laptops can all share one public address, with the router keeping track of which conversation belongs to which device.

NAT stretched IPv4 further than many expected, but it has costs. It adds a translation step, and it can complicate software that assumes every device can be reached directly. Cloudflare notes that some legacy software still assumes addresses will be in the IPv4 format at all.

How is IPv6 different from IPv4?

The practical differences fall into a few areas.

Area IPv4 IPv6
Address size 32-bit Far larger (340 undecillion addresses, per Cloudflare)
Written as Numbers separated by dots Hexadecimal groups separated by colons
Address shortage Depletion expected; NAT widely used Designed to avoid the shortage
Compatibility Original protocol Not backward compatible with IPv4, per NIST

That last row is the key to why the transition is slow. NIST’s guidelines on secure deployment state that IPv6 is not backward compatible with IPv4, so organizations must change network infrastructure and systems to adopt it. A device that speaks only IPv4 cannot talk directly to one that speaks only IPv6.

What is dual-stack, and how do devices choose?

During the transition, most networks run both protocols at once, a setup called dual-stack. A device with both kinds of address can reach IPv4-only and IPv6-only services alike.

When a device wants to open a website, it can ask the Domain Name System (DNS) for both kinds of address. Our article on how DNS works explains the lookup process. According to Cloudflare, an IPv4 address record is called an A record and an IPv6 address record is an AAAA record, and a technique called Happy Eyeballs has clients send both queries at once and use whichever answer comes back first. Cloudflare says iOS and macOS give the IPv6 lookup a 25 millisecond head start, and that browsers and operating systems have also imposed an artificial delay of 25 to 300 milliseconds on IPv4 connections to favor IPv6 where it works.

This matters for a common misunderstanding: having an IPv6-capable device does not mean its traffic uses IPv6. Cloudflare’s analysis points out that a client may still look up and connect over IPv4, and the server must support IPv6 as well.

How widely is IPv6 used today?

Adoption is growing slowly and varies enormously by place. Cloudflare’s 2025 year-in-review, covering data for that year, reports that 29% of dual-stack requests, meaning requests from clients that can use either version, were made over IPv6. That was up one percentage point from 28% in 2024. The figure counts requests, not people or bytes of data.

The national picture is uneven:

  • India led at 67%, according to Cloudflare, with Malaysia, Saudi Arabia and Uruguay also above 50%.
  • 94 countries and regions were below 10%, including Russia at 8.6%, Ireland at 6.5% and Hong Kong at 3.0%.
  • Twenty were below 1%, such as Tanzania at 0.9%, Syria at 0.3% and Gibraltar at 0.1%.

Different measurements give different answers. In an earlier Cloudflare analysis of August to October 2023, about 36% of HTTP requests used IPv6, just over 46% once automated traffic was excluded, and 30.5% of DNS queries to its 1.1.1.1 resolver pointed that way. On the server side, 60.8% of the top 100 domains had IPv6 records in that analysis. Cloudflare’s own estimate of actual IPv6 connections, combining both sides, was about 13.2%, and it cautions that adoption of IPv6 is not yet dominant.

Readers comparing numbers should note what is being counted: users, devices, requests, bytes or websites. A single “IPv6 percentage” rarely means the same thing twice.

Does IPv6 make you more secure, or just different?

IPv6 is sometimes described as inherently safer. The standards bodies are more cautious. NIST’s guidance on secure IPv6 deployment, SP 800-119, is framed as a planning document: it encourages organizations to understand the risks of deploying IPv6 and strategies to mitigate them, and it acknowledges “as-yet unknown impacts of IPv6 deployment.”

A few practical points follow from that guidance and from how the protocols work:

  • NAT is not a security tool. NIST’s glossary describes it as an address-replacement function, and some firewalls use it to conceal internal addresses, but protection comes from firewall rules and good configuration.
  • A network that turns on IPv6 without adjusting its firewalls and monitoring can leave a gap, because security devices need to understand both protocols. NIST’s USGv6 profile for federal systems therefore includes requirements for IPv6-aware firewalls and intrusion detection systems.
  • Running two protocols means two sets of things to configure and watch.

This article is not a configuration guide, but the principle is simple: IPv6 changes addressing, and security still depends on the controls around it.

What are the common mistakes and misconceptions?

  • “IPv4 has shut down.” It has not. Both are in use and most networks run both.
  • “My device supports IPv6, so I use it.” Use depends on your provider, your router and the site you visit.
  • “IPv6 is faster.” Cloudflare reported in 2016 that IPv6 visitors loaded pages 27% faster than IPv4 visitors on its network, but that is the company’s own measurement from one network and one period, and results depend on routes and translation steps. Treat it as a possibility rather than a guarantee.
  • “It is a drop-in upgrade.” Because IPv6 is not backward compatible, organizations must plan for it, test equipment and train staff.
  • “IPv6 adoption is a single number.” As the data above shows, it depends on what is measured and where.

How are governments and companies moving?

In the United States, NIST has worked since 2008 on the USGv6 profile, a set of IETF specifications covering routing, security, multicast, network management and quality of service, and it runs an accredited testing program to check products for compliance and interoperability. NIST says USGv6 Revision 1 was published in 2020. In November 2020, an Office of Management and Budget memorandum, M-21-07, described a federal goal to deliver information services, operate networks and access others’ services using only IPv6, according to NIST.

Companies are moving too. Cloudflare says it began enabling IPv6 for nearly four million domains in August 2016 and that 98.1% of its sites had IPv6 connectivity by the end of that rollout. It also says IPv6-only phones are becoming common, which lets mobile networks skip some translation steps. Those are the company’s own statements about its own network, not a measure of the wider web. For context on how shared infrastructure choices ripple outward, see our piece on cloud outages.

NIST also points out that in IPv6-only environments systems cannot lean on IPv4 as a fallback, which raises the importance of interoperability testing.

What does this mean for a home user or a small business?

Most people need to do nothing. If a provider enables IPv6, compatible devices simply start using it. Things that vary by person and place include:

  • Your provider. Some offer IPv6 by default, others do not, and national rates differ greatly, as shown above.
  • Your equipment. Older routers and some specialized devices may handle IPv6 poorly or not at all.
  • Your services. A business hosting its own servers should check whether its provider and its security tools support both protocols.
  • The date. All the figures here are snapshots. Adoption data changes monthly, and any single percentage should be read with its date and method.

The bottom line on IPv6

IPv6 is a successor addressing system built to fix a supply problem that IPv4 could only patch. It is steadily growing but still far from universal, and it will coexist with IPv4 for the foreseeable future. For readers, the useful takeaways are to be skeptical of single adoption figures, to treat claims of automatic security or speed carefully, and to remember that most of the work happens in networks, not on a user’s screen.

This article is general information, not a substitute for professional security or network engineering advice.

Sources: NIST; Cloudflare