5G is the fifth generation of mobile network technology, and it differs from 4G mainly by using wider slices of radio spectrum, a more flexible network design and targets for lower delay and many more connected devices. In everyday use, the gain you see depends far more on which radio band your carrier uses where you are standing than on the “5G” label itself.
This guide explains what the term means, how the technology works, what a measured comparison with 4G found and which misconceptions are worth dropping.
What is 5G, and who decides what counts as 5G?
Mobile networks are grouped into generations. Each generation is a set of technical standards that phones, base stations (the radio equipment on towers and rooftops) and carriers agree to follow. The International Telecommunication Union (ITU), the United Nations agency for communications technology, calls its 5G framework IMT-2020. According to the ITU, 5G networks are meant to transport a huge amount of data much faster and to process very high volumes of data with minimal delay.
The ITU says some of the applications it has in mind, such as remote medical services, smart cities, 3D video and industrial automation, may be difficult to support efficiently on legacy 3G and 4G networks. Those applications are mostly ambitions. The phone in your pocket mainly benefits from the first of the ITU’s goals, faster mobile data.
Which three jobs is 5G designed to do?
The ITU describes three main usage scenarios for IMT-2020:
| Scenario | Plain-English meaning |
|---|---|
| Enhanced mobile broadband (eMBB) | Faster, higher-capacity data for phones, video and crowded places |
| Ultra-reliable low-latency communications (URLLC) | Very quick and dependable responses, for uses such as machine control |
| Massive machine-type communications (mMTC) | Very large numbers of low-power sensors and devices connecting at once |
4G was designed mostly around the first job, delivering mobile internet to people. 5G adds the other two as formal design goals. The ITU also notes that further use cases may emerge. Most consumers today meet only the first scenario.
How does 5G work differently from 4G?
Both generations send data as radio waves between your device and a nearby base station. The differences come from what spectrum is used, how the network is built and how the radio link is managed.
Spectrum: more room to carry data
Radio spectrum is the range of frequencies available for wireless signals. Wider channels carry more data, just as a wider road carries more traffic. Researchers who measured real networks in the United States describe three tiers:
- Low-band, below 1 GHz: signals travel far and pass through walls well, but channels are narrow.
- Mid-band, roughly 1 to 6 GHz: a balance of coverage and capacity.
- High-band or millimeter wave, above 24 GHz: very wide channels, but short range and easy blocking by walls and foliage.
The ITU notes that the 24.25 to 86 GHz range would be needed to meet the expected data rates of the eMBB scenario, which shows how much the high-band end matters to the long-term vision. Today’s phones mostly lean on low and mid bands, which 4G also uses.
Network design: standalone versus non-standalone
Early 5G rollouts piggybacked on 4G. The UK government’s 5G supply chain strategy states that early 5G deployment was based on a “non-standalone” architecture, which requires compatibility with existing 4G equipment. In plain terms, a non-standalone connection uses 5G radio but relies on the 4G network behind it to manage the connection.
A “standalone” network uses a new 5G core, the control system at the center of the network, and does not depend on 4G. The measurement study discussed below found standalone connections had the best latency, non-standalone came next and 4G was slowest. Many networks run both modes, and your phone may switch between them without telling you.
The radio link: more of the same tools, used harder
5G borrows and extends techniques that 4G already used, such as sending several data streams at once through multiple antennas (known as MIMO) and combining channels (carrier aggregation). It also adds beamforming in mid-band and above, where the base station aims its signal toward a device rather than broadcasting evenly.
How much faster is 5G in practice? A worked example
A 2023 study posted on the arXiv preprint server, by Muhammad Iqbal Rochman, Wei Ye, Zhi-Li Zhang and Monisha Ghosh, measured AT&T, T-Mobile and Verizon in Chicago and Minneapolis using a Samsung Galaxy S22+. It covered low-band and mid-band only, not millimeter wave. It is a preprint, meaning it has not necessarily completed formal peer review, and it tested particular networks at a particular time.
The authors report the following observed maximum channel sizes:
- 4G: 20 MHz per channel, with up to 6 channels combined.
- 5G: 100 MHz per channel, with up to 4 channels combined.
Illustrative arithmetic using those numbers: six 4G channels give 6 x 20 = 120 MHz, while four 5G channels give 4 x 100 = 400 MHz, about 3.3 times as much spectrum in the best case. These are the largest combinations seen, not typical connections.
The study’s median download results make the same point from the other side. The best 5G channel set, a T-Mobile mid-band configuration combining 40 MHz and 100 MHz channels, reached a median of 218 Mbps. The best 4G channel, an AT&T 20 MHz channel, reached 31 Mbps. That is a gap of about 7 times (218 divided by 31 is roughly 7.0). The 5G configuration also used 140 MHz against 20 MHz, which is also 7 times as much spectrum.
The authors’ conclusion is that the throughput improvement is mainly driven by wider channel bandwidth. When they adjusted for bandwidth and number of data layers, the best 5G channel reached 3.14 bits per second per hertz per stream and the best 4G channel reached 2.18, and they described 5G’s normalized gains as marginal except for that one T-Mobile channel. In other words, 5G is faster mostly because it is given more road, not because each lane is dramatically quicker.
Is 5G latency really lower?
Latency is the delay between sending a request and getting a response. For video calls, cloud gaming and remote control it can matter more than raw speed. In the same study, standalone 5G showed the best latency, non-standalone 5G was next and 4G was slowest, and the authors called both 5G modes significant improvements over 4G. The text of the study does not give exact millisecond values, so this guide does not quote any.
Latency also depends on distance to the servers you are using, on the application and on your home or mobile provider’s routing. Your phone cannot cut the delay to a faraway server below what the physics of the whole path allows. For more on that path, see our explainer on how the internet works.
What do people commonly get wrong about 5G?
“5G always means a big speed jump.” The label tells you the radio technology, not the band. Low-band 5G with a 10 MHz channel is not dramatically faster than good 4G. In the study, some low-band 5G channels were 10 MHz wide while the widest 4G channel observed was 20 MHz.
“5G replaces 4G.” The two work side by side. The UK government’s strategy notes the first phase of UK public 5G was non-standalone, built on existing 4G equipment. Phones fall back to 4G where 5G is missing.
“Advanced features are everywhere.” The study found that the full four-layer MIMO mode was rarely used in the field, that rank 2 was the most common even where four layers were available, that no multi-user MIMO was observed and that the highest-order modulation seen was 256-QAM, not the newer 1024-QAM.
“5G is the same thing as Wi-Fi.” They are separate systems. Cellular networks run on licensed spectrum managed by carriers and cover wide areas, while Wi-Fi uses a router in your home or office. Our guide to how Wi-Fi works explains why that matters for speed.
What varies by place, carrier and device?
Several things change the experience from one reader to the next:
- Carrier spectrum. Different carriers hold different bands, so the same phone can behave differently on two networks. The study found one carrier’s mid-band signal was about 3.4 dB stronger than rivals’ on a higher band, a sign that band choice affects strength.
- Your location. Indoors, in a basement or in a rural area, a lower band is usually what reaches you.
- Your phone. A phone must have 5G hardware and support for your carrier’s bands. Older phones cannot use 5G at all.
- Time and rollout. The UK government’s strategy said 5G was available in over 100 towns and cities when it was written and set a goal of most of the population covered by 2027. Check your own carrier’s coverage map, since figures in strategy documents date quickly.
Battery use is another practical angle. Radios that work harder can drain a phone faster, and our piece on battery health covers how that interacts with ageing.
How to read a 5G claim: a short conclusion
When you see a 5G claim, ask three questions: which band, standalone or not, and measured where. The technology is a genuine step forward, built around wider channels, flexible networks and design targets for responsiveness and scale. But much of the headline promise, from remote surgery to smart cities, depends on deployments that are still uneven, and the speed you personally get is mostly a matter of spectrum and signal.
This article is general information about mobile technology, not a substitute for advice from your carrier or a professional.
Sources: International Telecommunication Union; UK Government; arXiv



